-40%
Foredom Chisel Carving Kit K.2252 Woodcarving LX Motor High Torque EMX Control
Foredom Chisel Carving Kit K.2252 Woodcarving LX Motor High Torque EMX Control
Foredom Chisel Carving Kit K.2252 Woodcarving LX Motor High Torque EMX Control
Foredom Chisel Carving Kit K.2252 Woodcarving LX Motor High Torque EMX Control
Foredom Chisel Carving Kit K.2252 Woodcarving LX Motor High Torque EMX Control
Foredom Chisel Carving Kit K.2252 Woodcarving LX Motor High Torque EMX Control
Foredom Chisel Carving Kit K.2252 Woodcarving LX Motor High Torque EMX Control
Foredom Chisel Carving Kit K.2252 Woodcarving LX Motor High Torque EMX Control
Foredom Chisel Carving Kit K.2252 Woodcarving LX Motor High Torque EMX Control

Foredom Chisel Carving Kit K.2252 Woodcarving LX Motor High Torque EMX Control

$ 215.14

Availability: 50 in stock
  • MPN: K.2252 Chisel Carving Kit
  • Type: Carving Chisel
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Condition: New
  • All returns accepted: Returns Accepted
  • Item must be returned within: 30 Days
  • Model: M.LX Prepacked WoodCarving Kit
  • Country/Region of Manufacture: United States
  • Return shipping will be paid by: Seller
  • Brand: Foredom
  • Restocking Fee: No

    Description

    FOREDOM K.2252 WOODCARVING KIT
    HIGH TORQUE - LX Motor+ EMX Control + 50c with 17 Chisels
    -
    CHISEL CARVING SET
    -
    Foredom’s kit model K.2252 is a pre-packed Chisel Wood Carving Kit includes the LX motor with the EMX table top speed control, the 50C Chisel Handpiece with 17 Chisels and a tube of Grease (see details below).
    JETS Product # 0614-2252
    FOREDOM # K.2252
    Components:
    -
    1. Series LX Motor:
    -
    The LX motor is a permanent magnet motor is specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling. M.LX, M.LXM, and M.LXB ball bearing motors feature full power and torque from start-up and throughout the entire speed range up to 5,000 rpm. They are ideal for use with Foredom’s drill presses. They also are well matched with the H.18, H.15 and H.15D Quick Change and Hammer Handpieces for stone setting. It comes equipped with a motor bale for hanging, and our standard 39" long key-tip inner shaft and outer sheath for connecting to any of Foredom’s interchangeable, quick disconnect handpieces.
    Foredom’s permanent magnet motors require the use of a C.TXR, C.SXR, or C.EMX speed control.
    Damage will result if the motor is connected to any other speed control.
    -
    2. C.EMX Speed Control:
    -
    The EMX is a table top speed control, is constructed of heavy duty plastic with durable solid state electronics. It has a dial control for precise speed settings, as well as good repeatability of previous settings. The C.EMX-1 has special electronics that converts AC current from an electrical outlet to DC current- the type required by the motor. It also has a special plug that fits the motor's shielded plug.
    For use with 115 Volt M.TX, M.TXB, M.TXH, M.LX, M.LXB, M.LXH and M.LXBH motors. 5" long, 5-7/8" wide, 2-3/4" high.  Control is interchangeable with Foredom's C.TXR-1 and C.SXR-1 controls.
    -
    3. H.50 Chisel Handpiece:
    -
    Foredom's 50C chisel handpiece gives a power assist to carving projects in all types of wood, plastic, and plaster. This handpiece has a contoured body design that features a rugged plastic barrel and tapered aluminum ends. The easy to maintain chisel handpiece is recommended for use at low speed with Series TX and LX motors and in forward rotation only with Series SR motors. Handpiece attaches to any flex shaft machine with a standard key tip shaft. The Chisel Handpiece must be used only in the forward motor direction.
    Recommended Speed:
    -
    Optimum Speed Range- 3,000-10,000 rpm.
    Max. Operating Speed- 18,000 rpm.
    Handpiece Specifications: 6" long, 1" in diameter, 4.6 oz.
    Maintenance:
    After every 200 hours of use you should clean and lubricate this handpiece. The old grease must be cleaned off of the interior cam chamber and replaced with new lubricant. If you do not have Foredom Grease (Part No. MS10008), it is available in our web store under Supplies and Parts - Lubrication- All Lubricants. Follow the instructions that came with your handpiece or click on the link for step by step maintenance instructions.
    Operating Tip:
    Using the chisel handpiece with a dial speed control is easier than with a foot operated control. Table top dial controls are available separately and named below. Consider ordering a kit containing the chisel handpiece and dial speed control (kit depends on motor -M.TX & M.LX or M.SR- that you have). Certain Foredom bench mounted flex shafts also come with dial controls built into their bases (models M.LXM, M.TXM and M.SRM).
    -
    4. Chisels
    17
    included in this Kit:
    -
    -
    6pc Chisel SetAKHK550
    with A-KC503, A-KC504, A-KC505, A-KC506, A-KC509, and A-KC510 chisels.
    -
    5pc Chisel Set AKHK560
    with A-KC501, A-KC502, A-KC507, A-KC508, and A-KC511 chisels.
    -
    6pc Chisel Set AKHK570
    with A-KC512, A-KC513, A-KC514, A-KC515, A-KC516, and A-KC517 chisels.
    -
    5. Flexible shaft grease
    Note:
    NOTE:
    This is a
    115 Volt Unit
    for Domestic use - For International M.LX motors are available in 230 Volt please contact us for Details.
    -
    Motor and Speed Control carry a 2-Year Limited Warranty from Foredom.
    -
    *Item is brand new.
    -
    Ships  Ground - Box Weight 17 Lbs - Box Size 19" x 13" x 5"
    Visit:
    JETSTOOLS
    our ebay Store Listings, where you can see many more Foredom Kits, Foredom Tools and Products, along with Flex Shaft Accessories and a line of
    J
    ewelers
    E
    quipment
    T
    ools &
    S
    upplies
    .
    JETSInc.